Added: 3640 Router
April 28th, 2008
I discovered that I cannot create 802.1Q trunks between my 2513 routers and my switch. This was all all I needed to push me to purchase the 3640 router I have been looking at for a while.
The router is going to come with a NM-2E2W network module (two Ethernet ports) and the DRAM and FLASH maxed out (64MB/16MB). This should be good to get me started. later on down the road I will probably add a serial module to connect this route to my 2513′s.
Next up will probably be a 3550 switch. I am trying to get one with the enhanced image to play around with some of the Layer-3 features.
Categories: Cisco Lab